4 x Camera Hikvision 2MP IP CCTV System

£799.00 Excl. VAT

4 x Camera Hikvision 2MP IP CCTV System comes installed in your home or business in London, Essex, Hertfordshire or Kent by our professional in-house installers.

SKU: (E)DS-7604-NI-K1-4 Category:


This 4 x Camera Hikvision 2MP IP CCTV System comes installed in your home or business in London, Essex, Hertfordshire or Kent by our professional in-house installers.

This is our entry level system for those who are on a budget and require a basic level of coverage. Not sure? see Our IP CCTV Range Explained.

IP CCTV cameras are more advanced than other formats as each camera is technically a stand alone network device, as well as the recorder. This means cameras can be logged into directly to manage settings, some have wifi built in and/or limited on board SD card recording and don’t need the NVR recorder to operate.

IP CCTV can save a lot of wiring also where an existing network infrastructure is in place (CAT5/6 cabling throughout an office block or home for example) and support POE (power over ethernet) when plugged into a POE switch/NVR or injector so to provide the data/video connection and power down the one CAT5/6 connection.

Installation start times for this system are between 8am – 10am, Monday to Friday. If you require an alternative start time, or if you are unsure of any of the information contained on this page please do not hesitate to contact us.

A deposit of £299 secures an installation date. On completion or your order, our website will automatically redirect you to our live installation diary so that you can select an installation date of your choice.

The remainder of the balance is then paid for at the completion of your installation via cash, BACS, credit/debit card or PayPal.

You will receive the following:

  • Hikvision DS-7604NI-K1/4P (B) Network Video Recorder
  • 4 x Hikvision 2MP IP Camera (DS-2CD2325FWD-I)
  • 2TB Surveillance Optimised Hard Disk Drive.
  • Cables required to install cameras direct to NVR.
  • 1.8M HDMI cable to connect the recorder to your TV / monitor.
  • 1.8M Network cable to connect to router / internet.
  • USB Mouse.
  • Configuration of Mobile Viewing Applications for remote viewing.
  • Free after sales support.
  • 36 Months Warranty.

The Network Video Recorder is capable of:

  • Third-party network cameras supported for any existing hardware
  • Recording at up to 8 MP resolution
  • HDMI Video output at up to 4K (3840 × 2160) resolution
  • HDD quota and group management
  • 4 independent PoE network interfaces
  • 4TB Hard Drive

The camera, depending on the model required is capable of:

  • Record footage to an onboard Micro SD CARD as well as to a NVR for that extra piece of mind. If your NVR is stolen, you can still get the footage directly from the camera via the Micro SD Card (Optional)
  • Connect the camera to your alarm system
  • Microphone for voice recording
  • Vandal proof
  • Water proof IP66
  • HD real-time video
  • 2MP resolution (1920 x 1080 @ 30fps)

Need a microphone included?

Get notified when an intruder is outside your home!

This amazing system sends your mobile device a notification when someone is outside your home.







Hikvision CCTV systems can support a multitude of notifications that can be configured to perform various actions from alerting your mobile phone to activating a parking barrier.

That being said, this guide talks about the three main notification options.

Motion Detection
In its simplest form, this is when an object enters the camera view area and a motion is triggered.

Line Crossing
An invisible line can be drawn on a particular area of your camera view area, for example the driveway threshold or the garden boundary. Once an object crosses over that line (from either way) - a line crossing is triggered.

Intrusion Detection
This is similar to Motion Detection but more specific. With Intrusion Detection an invisible quadrilateral shape can be drawn on a particular area of your camera view, for example directly outside your front door. Once an object then enters that area - an intrusion detection is triggered.

With all of the options above, the system is unable to detect the difference between a human, pet or other object. This can often result in false notifications being triggered to the user. In addition to this, if the system generates the notification - it is then down to your broadband provider (router) to push the notification out to your mobile device. This will often fail if your provider is not quite up to scratch or your mobile phone is currently in an area with poor coverage.

Because of this, we do not provide support on notifications that are sent to your mobile device.

Unfortunately, no.

We are authorised and Certified by Hikvision UK to supply and install their products.

We are unable to provide you with an installation only service if you have purchased your own equipment as we are not insured to do so.

In addition to this, we would be unable to provide you with our comprehensive support and warranty for three years that our systems come with.

If you are considering purchasing your own equipment, please consider our guide here : Pitfalls of buying Hikvision from eBay or Amazon

Our prices are fixed, so the cost of your installation will really depend on the amount of cameras you require and the type of system.

You can obtain a free online quotation by visiting our "Online System Builder"

You can see the differences between the systems by reading  "Our IP Systems Explained"

You can learn about our 'Fixed Prices, No Surprises' policy by reading our "Simple as 2, 3, 4"

No, unlike other companies and products - our systems do not need a fixed IP address, thus saving you at least £5 per month from your internet provider. We use the Hikvision Cloud P2P solution to ensure your CCTV is always reachable from your mobile device, regardless of IP changes.

For the use of Standard Definition (SD) streaming a 0.5mb service is sufficient.

For High Definition (HD) or streaming of multiple cameras at once, we would recommend anything above 2mb.

In either scenario, we always recommend using VirginMedia Fibre Optic to provide you with the best experience possible.

We’ll arrive at your home just prior to your agreed installation time. If we’re held up for any reason, we’ll contact you immediately to let you know. If you require us to use an unmarked van please let us know and we’ll do our best to accommodate (additional cost). The first thing we’ll do at your property is identify areas of risk such as entry points, weaknesses and vulnerabilities. Then we will plan the cable routing. This usually takes between 20 and 30 minutes and if it’s possible, we’d like you to be there to give us your approval prior to us starting the installation. We always do our best to hide cables and make sure the job is neat and tidy, in fact, we take great pride in it. Up to 8 camera systems can usually be installed within a day, however larger 8+ camera systems will take additional days and you would have been advised of this. On completion of  your installation, we provide you with a tutorial on how to use the system, together with our in house 'Quick User Guide'. Completion payment is then required prior to the installer leaving the premises, as per our Terms & Conditions.
All of our systems are capable of this, however this is also depending on your internet connection / router location. We will always install so that remote viewing is enabled by default.
Once we’ve completed your installation, we’ll give you a full demonstration of it’s capabilities and provide you with a complete and comprehensive set of instructions that are written in plain English. You’re more than welcome to call us at any time after your installation should you require any assistance whatsoever. If your system is networked, with your permission, we can change any settings you want updating remotely. You may need to provide us with access details.